Characteristics
1.2 Rectifier-inverter cubicle
The parameters given in the table opposite can be used to determine the required rating of a
Characteristics of rectifier-inverter cubicles
rated | cubicle | cubicle | cubicle | maximum | heat losses (2) |
| |
inverter | width W | height H | depth D | weight |
|
| |
in kW | in cal./s | ||||||
output | in mm (1) | in mm | in mm | in kg | |||
|
| ||||||
in kVA |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
800 | 3600 ±10 | 2000 | 840 | 4260 | 47 | 11233 | |
|
|
|
|
|
|
| |
900 | 3600 ±10 | 2000 | 840 | 4260 | 47 | 11233 | |
|
|
|
|
|
|
|
(1)the width of the vertical side clearance bars (25 mm) on each side must be added to the indicated cubicle width, i.e. 50 mm in all per cubicle. This applies to all cubicle installation cases. Cubicle widths have been rounded off to the nearest cm.
(2)the indicated heat losses are those produced by the unit at full rated load and with the battery float charging. They must be taken into account when dimensioning the air conditioning system. The cubicles are cooled by forced ventilation.
The air enters via the doors and grids at the bottom and is discharged via the roof.
1.3Static Switch Cubicle
Characteristics of Static Switch Cubicles
rated | cubicle | cubicle | cubicle | maximum | heat losses (2) |
| |
SSC | width W | height H | depth D | weight |
|
| |
in kW | in cal./s | ||||||
output | in mm (1) | in mm | in mm | in kg | |||
|
| ||||||
in kVA |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
2000 | 2450 ±10 | 1900 ±10 | 840 | 1710 | < 0.5 | < 120 | |
|
|
|
|
|
|
|
(1)25 mm must be added on each side to the indicated cubicle width, i.e. 50 mm in all per cubicle. This applies to all cubicle installation cases. Cubicle widths have been rounded off to the nearest cm.
(2)the indicated heat losses are those produced by the unit at full rated load when operating on Mains 2. They are not to be taken into account when dimensioning the air conditioning system. The cubicles are cooled by forced ventilation.
