Meeting Size Requirements

When defining the custom form, the size and printer area margins you set must meet certain requirements.

When setting the custom size:

The width and height must meet the following minimum and maximum measurements:

Width: 7.62 cm (3.00 inches) to 21.59 cm (8.50 inches)

Height: 12.70 cm (5.00 inches) to 35.56 cm (14.00 inches).

The height must be greater than the width.

When setting the printer area margins:

The margins must be set as follows (if you set the custom-sized width less than 21.20 cm (8.35 inches)):

Top margin: 0.20 cm (0.08 inch)

Bottom margin: 0.60 cm (0.24 inch)

Left margin: 0.20 cm (0.08 inch)

Right margin: 0.20 cm (0.08 inch).

If you set the custom-sized width greater than 21.20 cm (8.35 inches), you must calculate the left and right printer area margins as follows:

[width] minus 20.80 cm (8.19 inches) divided by 2 equals [left/right margin]

For example, if you set the width to 21.59 cm (8.50 inches), calculate the left and right margins as follows:

21.59cm (8.50 inches) minus 20.80 cm (8.19 inches) divided by 2 equals 0.395 cm (0.155 inch)

Printing

Chapter 3

Printing 3-9

Page 29
Image 29
Canon L290 manual When setting the custom size, When setting the printer area margins