Canon LEGRIA FS20, LEGRIA FS21, LEGRIA FS22 Histogram Display, Protecting Photos, FUNC. Protect

Photos

AUTO EXPOSURE BRACKETING

Press PHOTO , first halfway to activate the autofocus and then fully to record the photos.

Three photos in different exposures will be recorded.

Histogram Display

When viewing photos you can display the histogram and the icons of all the functions used at the time of recording. Use the histogram as a reference to verify the correct exposure of the photo.

( 23)

The area to the right of the histogram represents highlights and the left side represents shadows. A photo whose histogram skews to the right is relatively bright; while one whose histogram peaks to the left, is relatively dark.

Pixel Count

Shadows Highlights

NOTES

The histogram will appear also after recording a photo, while reviewing it within the time set for the [REVIEW] option. You can choose to turn off the histogram by pressing DISP. ( 51).

Protecting Photos

You can protect photos from accidental erasure.

( 23)

Protecting Single Photos

1Open the photo selection screen.

FUNC. [ PROTECT]

[ PROTECT] appears on the screen.

2Select () the photo you want to protect.

3Press to protect the photo.

appears on the bottom bar and

the photo cannot be deleted. Press

again to remove the protection.

4Repeat steps 2-3 to protect additional photos or press FUNC. twice to close the menu.

Protecting Photos from the Index Screen

Options

[INDIVIDUAL PHOTOS]

Opens the same screen described in Protecting Single Photos ( 64). Continue from step 3 of that procedure to protect the photo.

[SELECTED PHOTOS]

Protects all the photos selected in advance (marked with a checkmark). Refer to Pre- selecting Recordings from the Index Screen ( 39).

[REMOVE ALL SELECTIONS]

Removes the protection from all photos.

64