Canon LEGRIA FS200, LEGRIA FS21, LEGRIA FS22 Messages Related to the Optional DW-100 DVD Burner

Messages Related to the Optional DW-100 DVD Burner

If a message appears while the camcorder is connected to the optional DW-100 DVD Burner, refer to the following section and also to the instruction manual of the DVD Burner.

CANNOT READ THE DISC CHECK THE DISC

-During disc recording mode, this message can appear when a commercially available DVD disc (a DVD disc containing movies, software, etc.) or an 8 cm mini DVD disc is inserted.

CLOSE THE MEMORY CARD SLOT COVER

- The memory card slot cover is open. Close the cover after correctly inserting the memory card ( 28).

CONNECT THE COMPACT POWER ADAPTER

- The camcorder is being powered by the battery pack. Connect the compact power adapter to the camcorder.

DISC ACCESS FAILURE CHECK THE DISC

-There was an error when reading the disc or attempting to write onto it.

-This message can also appear if condensation has formed. Wait until the DVD burner dries completely before resuming use ( 105).

-The disc may not be loaded correctly. Try removing the disc and reinserting it.

ERROR READING THE DATA

-Error while reading the recordings from the camcorder.

-Check that the USB cable was not accidentally disconnected.

LOADING THE DISC

- Reading data from the disc.

NO DISC

-Insert a disc into the DVD burner.

-This message can also appear if condensation has formed. Wait until the DVD burner dries completely before resuming use ( 105).

NO PHOTOS

- There are no photos to add to the disc.

NO SCENES

- There are no movies to add to the disc.

NO SCENES LEFT TO ADD

-You selected to create a DVD with the [REM.SCENES] setting, but all the scenes have already been added to discs created in the past; there are no applicable scenes.

NO TRANSFER ORDERS

-You selected to create a DVD with the [TRANS.ORD] setting, but no photos have been marked with transfer orders ( 80).

OPERATION CANCELED

- The USB cable was disconnected and the operation was canceled. Check the USB connection.

UNABLE TO RECOVER DATA

- Could not recover a corrupted file.

99