Canon LEGRIA FS20, LEGRIA FS21 Accessories Fasten the grip belt, To Remove the Grip Belt

Preparations

Accessories

Fasten the grip belt.

•Adjust the grip belt so that you can reach the zoom lever with your index finger, and the Start/Stop button with your thumb.

•You can remove the grip belt and replace it with the supplied wrist strap.

TO REMOVE THE GRIP BELT

1Lift the padded handgrip's flap and detach the strap from the Velcro pad.

2Pull the strap to remove it first from the front bracket on the camcorder, then to unthread it from the handgrip and finally to remove it from the rear bracket on the camcorder.

TO ATTACH A WRIST STRAP

Pass the attaching end of the wrist strap through the back bracket on the camcorder, thread the wrist strap through the loop and fasten.

You can also attach the wrist strap to the strap mount on the grip belt to use both for extra convenience and protection.

TO ATTACH A SHOULDER STRAP

Pass the ends of the shoulder strap through the strap mount on the grip belt and adjust the length of the strap.

20