Canon LEGRIA FS200, LEGRIA FS21 Preparing the Wireless Controller Only and Accessories

supplied compact power adapter to voltage converters for overseas travels or special power sources such as those on aircraft and ships, DC-AC inverters, etc.

NOTES

•Turn off the camcorder before charging the battery pack. The battery pack will not charge while the camcorder is on.

•If remaining battery time is an issue, you can power the camcorder using the compact power adapter so the battery pack will not be consumed.

•Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day before, to ensure a full charge.

•We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.

1Press the tab in the direction of the arrow and pull out the battery holder.

2Place the lithium button battery with the + side facing up.

3Insert the battery holder.

TO USE THE WIRELESS CONTROLLER

Preparing the Wireless Controller

( only) and Accessories

First, insert the supplied lithium button battery CR2025 into the wireless controller.

Tab

Point the wireless controller at the camcorder’s remote sensor when you press the buttons.

You can rotate the LCD panel 180 degrees to use the wireless controller from the front of the camcorder.

NOTES

•The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight.

•If the wireless controller does not work, check that [WL.REMOTE] is not set to

[ OFF ] ( 87). Otherwise, replace the battery.

19