7 Load the paper into the paper cassette with the print side up. Make sure the paper stack sits below the small fin (A) on the side paper guide.

8 Adjust the paper guide rail to match the size of paper.

9 Close the front panel of the paper cassette.

To load Legal-size paper, leave the front panel of paper cassette open and adjust the paper guide rail (A) for Legal- size paper.

Set Up the Machine

10 Match up the edge of the dust cover (A) and the edge of the paper cassette (B), and place the cover on top of the cassette.

11 Attach the document feeder tray on the document feeder.

The default paper size/type setting is <LTR> and <PLAIN PAPER>. When you load other size and/or type of paper, change the paper size/type setting. For details, see Chapter 2, “Document and Paper,” in the Basic Operation Guide.

For loading paper in the multi-purpose tray, see Chapter 2, “Document and Paper,” in the Basic Operation Guide.

If a printout falls out of the output tray, extend the output tray extension on the front side of the machine and set the paper stopper upright.