Software Settings with Computer

Before Installation

•For Windows 2000/XP/Server 2003/Vista, logon as Administrator to install the software.

•On the screen shown at each step, click on the circled button to proceed.

•Make sure the machine is turned on.

(See “Connect the Power Cord and Turn On the Machine,” on p. 10.)

•Make sure the network cable is connected to the machine. (See “Connect the Machine to a Network,” on p. 21.)

•Make sure an IP address is assigned to the machine. (See “Checking the IP Address Setting,” on p. 21.)

Installation Procedure

1

2

If the MF4200 Series CD-ROM Setup screen is not displayed, click [start] on the Windows task bar → [My Computer].

Windows Vista: click [start] on the Windows task bar → [Computer]. Windows 2000: double-click [My Computer] on the Windows desktop.

Open the CD-ROM icon, then double- click [MInst] ([MInst.exe]).

3

While installing the software on a computer running Windows Server 2003, the display in this step does not appear.

4

5

6

If the firewall is applied to the operating system, the dialog box below appears. Click [Yes] and continue the installation.

23