Software Settings with Computer
●The LCD display turned off:
The machine may enter the sleep mode while you are setting up the machine. Press [Energy Saver] to turn the machine back on and continue the setup.
1 Press [Additional Functions].
2 Press [] or [] to select <12 SYSTEM SETTINGS>, then press [OK].
3 Press [] or [] to select <2 NETWORK SETTINGS>, then press [OK].
4 Press [] or [] to select <4 VIEW IP ADDRESS>, then press [OK].
Manual Setting
5 Press [] or [] to select <1 IP ADDRESS>, <2 SUBNET MASK>, or <3 GATEWAY ADDRESS>, then press [OK].
If the machine is communicated with the network properly, the IP address, subnet mask and gateway address are displayed.
If not, IP address, subnet mask and gateway address are not displayed.
If the machine does not get the IP address 30 seconds after you connect the LAN cable, turn off the main power switch once, and then turn it on again and wait for another 90 seconds. If the machine still does not get the IP address, ask your network administrator.
We recommend you to take a note of the IP address you confirmed here, because you need it for “Using the Remote UI” in the Reference Guide.
6 Press [Stop/Reset] to return to the standby mode.
If they are not displayed, that indicates that the machine is not communicated with the network. Please check the setting of the IP address.
This is the setting for the Static IP. If the machine gets IP address automatically in “Automatic Setting”, skip this setting.
In this setting, you enter the IP address, subnet mask, gateway address manually. [Additional Functions] → <12 SYSTEM SETTINGS> → <2 NETWORK SETTINGS> → <1 TCP/IP SETTINGS> → <1 IP ADDRESS AUTO> → <OFF> → <2 IP ADDRESS> → Enter the IP address → <1 TCP/IP SETTINGS> → <3 SUBNET MASK> → Enter the subnet mask → <1 TCP/IP SETTINGS> → <4 GATEWAY ADDRESS> → Enter the gateway address number → Press [Stop/Reset] → Turn off the main power → Restart the machine. For details on this setting, see Chapter 6, “Network,” in the Reference Guide. Once you complete the setting, please proceed to “Checking the IP Address Setting,” on p. 21.
22