Software Settings with Computer

Network Connection

Connect the Machine to a Network

Connect a Category 5 or greater twisted pair LAN cable to the 10Base-T/100Base-TX port on the back of the machine. Connect the other end of the cable to a network router or a hub.

–The machine does not come with a LAN cable.

–If you use the machine as a local printer, connect the machine directly to a computer using a USB cable. (See “USB Connection,” on p. 27.)

Automatic Setting

By default, the IP address is assigned to the machine automatically by the DHCP server. Therefore, all you have to do when using DHCP is just to connect the network cable. After connecting the LAN CABLE, wait for 30 seconds until the machine gets the IP address.

●Checking the IP Address Setting

To make sure this machine is communicated with the network properly, follow the procedure on p. 22.

–It is recommended that the network administrator perform the procedure on p. 22.

–Before performing the procedure on p. 22, make sure that the machine is turned on and connected to a network.

21