5 | Measure Wireless Performance |
|
1 | 2 | |
|
|
|
| On the Connection Performance |
|
| Measurement dialog box, click |
|
| Next. |
|
|
|
|
|
|
|
Confirm the measurement results, then click Finish.
Ensure that 
is displayed in Connection performance between the printer and the access point.
The Printer Setup Utility and Canon IJ Network Scanner Selector will start up.
To check whether the new location is better, click Remeasurement. Measurement of the communication status is performed again.
6 | Complete the Setup |
|
1 | 2 | 3 |
|
|
|
|
|
|
a. Wait for a while, then select
Canon MP620 seriesb. Click Add
The alphanumeric string after Canon MP620 series is the machine's MAC address.
If the machine has not been detected, make sure of the following.
a. On the Canon IJ Network Scanner Selector screen select Canon MP620 series Network in TWAIN Data Source Name and the MAC address of the machine in Network Device List
b. Click Apply to use the machine as a scanner
a. Confirm that a check mark is displayed
b. Click Exit to close the dialog box
–The machine is turned on.
–The firewall function of any security software is turned off.
–Wireless LAN Connection: The computer is connected to the access point.
–The machine is not set to use access control (MAC address filtering).
Proceed to page 56 of the Getting Started Guide, “Loading Paper”
Apple, AirPort Extreme, Macintosh and Time Capsule are trademarks of Apple, Inc., registered in the U.S. and other countries.
Getting Help from Canon
Visit www.canontechsupport.com
Call 1-800-828-4040
Monday - Friday (excluding holidays), during the warranty period
©CANON INC. 2008 | PRINTED IN U.S.A. |
