6

7

8

Install the ink tank.

*1

(1) Insert the front end of the ink tank into the Print Head.

(2) Press on themark on the ink tank until the ink tank snaps firmly into place.

(3) Make sure that the ink lamp lights up red.

Important

The machine cannot be used unless all the ink tanks are installed.

(1)

(3) (2)

*1 Make sure the position of the tank matches the label.

Close the Inner Cover.

Note

Make sure that the Inner Cover is closed. Printing will not start with the Inner Cover open since paper can not be fed properly.

Gently close the Scanning Unit (Printer Cover).

Caution

zBe sure to hold the Scanning Unit (Printer Cover) firmly using both hands, and be careful not to get your fingers caught.

zDo not hold the LCD or the Operation Panel.

Note

zIf the error message is still displayed after the Scanning Unit (Printer Cover) is closed, see “Error Message Is Displayed on the LCD” on page 71.

zWhen you start printing after replacing the ink tank, Print Head Cleaning is performed automatically. Do not perform any other operations until Print Head Cleaning finishes.

52Routine Maintenance