LCD Cannot Be Seen At All
Cause | Action |
Cannot see the display on the LCD.
zIf the POWER lamp is off
The machine is not powered on. Connect the power cord and press the ON/ OFF button. The machine will power on and the LCD will display a message.
zIf the POWER lamp is lit
The LCD may be in the
An Unintended Language Is Displayed on the LCD
Cause |
| Action |
The language you want to be displayed | Select the language you want to be displayed according to the following | |
is not selected. | procedure. |
|
| (1)Press the HOME button. Wait for about 5 seconds, select , and then | |
| press the OK button. |
|
| (2)Press the ] button to select | , then press the OK button. |
| (3)Press the } button four times, then press the OK button. | |
| If the Bluetooth unit is connected to the machine, press the } button five | |
| times, and then press the OK button. | |
| (4)Press the { or } button to select the language you want to be displayed, | |
| then press the OK button. |
|
Cannot Install the MP Drivers |
| |
|
|
|
Cause |
| Action |
Unable to proceed beyond the Printer Connection screen.
If you were unable to proceed beyond the Printer Connection screen, follow the procedure below to reinstall the MP Drivers.
(1)Click Cancel on the Printer Connection screen.
(2)Click Start Over on the Installation Failure screen.
(3)Click Back on the screen that appears next.
(4)Click Exit on the Welcome screen, then remove the
(5)Turn the machine off.
(6)Restart the computer.
(7)Make sure you have no application software running, including
(8)Follow the procedure described in the Easy Setup Instructions to reinstall the MP Drivers.
74Troubleshooting