DV Dubbing

You can input video from other digital video devices via the DV terminal, and record the input video on the tape in the camcorder. You can also record the input video as a movie or still image on a memory card.

Connecting

Check the direction before connecting the DV cable. Refer also to the instruction manual of the connected device.

Digital video device

(e.g. camcorder)

Signal flow

Commercially available DV cable

Dubbing

1.Set the camcorder to PLAY(VCR)• mode and load a blank cassette.

If “AV DV” is displayed, change the setting ( 66).

2.Connected device: Load the recorded cassette.3.Press the REC PAUSE button.4.Connected Device: Play back the tape.

You can check the picture on the camcorder’s screen.

5.Press the / button when the scene you wish to record appears.

Recording starts.

6.Press the button to stop recording.

•Press the / button to pause recording.

•Press the / button again to restart recording.

7.Connected Device: Stop playback.

Recording the Input Video on a Memory Card

The size of the still image recorded on the memory card will be 640 x 480. The still image quality and the movie size can be selected.

1.Set the camcorder to PLAY(VCR)• mode.

•If a cassette is loaded, make sure that the tape is stopped.

•If “AV DV” is displayed, change the setting ( 66).

2.Selecting the still image quality:

Press the FUNC. button. Select the still image quality symbol followed by a setting option and press the FUNC. button.

Selecting the movie size:

100