Canon Optura 600 AUDIO SETUP

REC MODE: Switches the recording mode. The long play mode extends the tape usage by 1.5 times.

Tapes recorded in LP mode cannot be used for audio dubbing.

Depending on the nature and usage condition of the tape, picture and sound recorded E in LP mode may be distorted. We recommend using the SP mode for important

recordings.

If you record in both SP and LP modes on the same tape, the playback picture may become distorted and the time code may not be written correctly.

If you play back a tape that has been recorded in LP mode with another digital device on this camcorder, or vice versa, picture and sound may become distorted.

VIDEO INPUT: When recording from an analog line-in ( 98) or when converting analog signals to digital ( 102), select the appropriate input signal corresponding to the output of the analog device connected to the camcorder.

[VIDEO]: When you connect an analog device (VCR, TV or camcorder) via the audio/ video terminal.

[S VIDEO]: When you connect an analog device (VCR, TV or camcorder) via the S-video terminal.

AUDIO SETUP

Menu Items

Setting Options

OUTPUT CH

L/R,

L/L,

R/R

-

AUDIO DUB.

AUDIO IN,

MIC. IN

104

WIND SCREEN

AUTO,

OFF

73

MIC ATT

ON,

OFF

72

MIC LEVEL

AUTO,

MANUAL

71

12bit AUDIO

STEREO1,

STEREO2,

MIX/

105

FIXED,

MIX/VARI.

MIX BALANCE

105

AUDIO MODE

16bit,

12bit

-

PHONES VOL.

-

OUTPUT CH: Switches the output channels when playing back a tape with audio recorded on two channels.

[L/R]: Stereo: L+R channels, Bilingual: Main+Sub.

[L/L]: Stereo: L channel, Bilingual: Main.

[R/R]: Stereo: R channel, Bilingual: Sub.

AUDIO MODE: Switches the audio recording mode.

[16bit] records in high sound quality.

Select [12bit] if you plan to dub audio later.

PHONES VOL.: Adjusts the headphones volume during recording.

Turn the SET dial up or down to adjust the volume.

Settings the Changing	Functions Advanced
(2)

67

Contents

(QJOLVK , SRUWDQW8VDJH,QVWUXFWLRQV IMPORTANT SAFETY INSTRUCTIONS Page Using this Manual Trademark Acknowledgements Table of contents Digital Camera Functions Editing Printing Connecting to a PC Trouble Page Checking Supplied Accessories Components Guide Left side view Right side view Front view Back view Top view Bottom view Wireless Controller WL-D85 Screen Displays When playing back a tape Tape operation When playing back a memory card StepPreparation1: Preparing the Power Supply Using a Household Power Source 1. Turn the POWER switch to OFF 2. Connect the power cord to the power adapter 3. Plug the power cord into a power outlet Page Step 2: Loading a Cassette Step 3: Inserting a Memory Card Step 4: Preparing the Camcorder Step 5: Using the Wireless Controller Step 6: Adjusting the LCD Screen Step 7: Changing the Display Language Step 8: Setting the Time Zone, Date and Time Time Zones Time Zones and Difference from GMT/UTC Recording Movies on a Tape Screen Displays during Recording Reviewing and Searching when Recording Record Review Press and release the (record review) button Record Search Recording on a Memory Card Page Screen Displays during Still Image Recording Screen Displays during Movie Recording Zooming Tips for Better Recording Holding the Camcorder For More Stability Lighting PlayinglaybackBack a Tape Special Playback Modes /(Playback Pause) (Fast Forward Playback) / (Rewind Playback) –/(Reverse Playback) +/(Frame Advance) / –/(Frame Reverse) Playing Back a Memory Card Adjusting the Volume Playing Back on a TV Screen Using the Recording Programs Selecting the Recording Program 1.Set the camcorder to CAMERA•or CAMERA•mode 2.Turn the mode dial to switch between the recording programs Using the Super Night Mode Using the Special Scene Modes FOLIAGE BEACH SNOW SUNSET Using the Program AE Mode Using the Shutter-PriorityAE Mode Using the Aperture-PriorityAE Mode AdjustingRecordingExposure Manually Adjusting the Focus Manually Using the Mini Video Light Using the Self-Timer Recording with an External Microphone Changing the Settings with the FUNC. Button List of Menu Items (FUNC.) Setting the White Balance Page Selecting an Image Effect Using Digital Effects Faders (59) Effects Multi-ImageScreen (61) Card Mix (62) Availability of Digital Effects by Operating Modes: Selecting a Fader D.EFFECT OFF 2.Press the FUNC. button 3.Select the digital effect symbol followed by 7. Fade in: Press the /button in playback pause mode Fade out: Press the /button in playback mode Selecting an Effect [EFFECT] 4.Select the effect type Using the Multi-ImageScreen 1.Set the camcorder to CAMERA•or PLAY(VCR)•mode CAMERA•mode: Set the mode dial to a mode other than or 3.Select the digital effects symbol followed by [ MULTI-IMAGESCREEN] Card Chroma Key (CARD CHROMA) Card Luminance Key (CARD LUMI.) Camera Chroma Key (CAM. CHROMA) Card Animation (C. ANIMATION) 1.Set the camcorder to CAMERA•mode Upload a sample image from the DIGITAL VIDEO SOLUTION DISK to the memory card 3.Set the mode dial to a mode other than 5.Select the digital effects symbol followed by [CARD MIX] 6.Select the image you wish to combine with the CARD+/– button Changing the Settings with the MENU Button List of Menu Items (MENU) CARD OPERATIONS (*in index screen display) VCR SETUP AUDIO SETUP DISPLAY SETUP SYSTEM MY CAMERA Adjusting the Audio Recording Level -dB4012 Using the Wind Screen Widescreen TV Recording (16:9) Creating a Start-upImage Magnifying the Image Displaying the Data Code End Search Returning to a Pre-markedPosition Date Search SelectingDigital Cam ra Functionsthe Image Quality/Size Selecting the Still Image Size and Quality L 2304x1736/FINE 3.Select the still image size/quality symbol 4.Select the still image size 5.Select the still image quality Simultaneous Recording on Tape and Memory Card Using the Flash Page Selecting the Light Metering Mode Changing the Focusing Mode Selecting the Drive Mode Page Recording Panoramic Images (Stitch Assist Mode) 9.Press the FUNC. button after the last image Playing Back/Searching Images Card Jump Function 2.Press and hold the CARD + or CARD – button Protecting Images Erasing Images Formatting a Memory Card RecordingEditingto a VCR or Digital Video Device Analog Line-inRecording Recording the Input Video on a Memory Card Press the MENU button and select [VCR SETUP]. Select [AV 3.Selecting the still image quality: Selecting the movie size: 4.Connected device: Load a recorded cassette and play back the tape DV Dubbing 3. Connected device: Load a recorded cassette and play back the tape 4.Press the PHOTO button halfway when the scene you wish to record appears 4.Press the start/stop button when the scene you wish to record appears Copyright Signal Converting Analog Signals into Digital Signals (Analog-DigitalConverter) Turning On the Analog-DigitalConverter AV DV Audio Dubbing Playing Back the Added Sound AUDIO SETUP12bit AUDIO Recording from the Tape on a Memory Card Page Printing Still Images Printing with the (Print/Share) Button 1. Select the still image you wish to print with the CARD +/– button 2. Press the (print/share) button Printing after Selecting the Print Settings Page Selecting the Print Settings Paper Settings Including the Date in the Print Setting the Print Effect (Image Optimize) 3.Turn the SET dial to select the paper size and press the SET dial 4.Turn the SET dial to select (BORDERS) and press the SET dial 5.Turn the SET dial to select a borders option and press the SET dial Selecting the Image Style Selecting the Borders Including the Date Trimming Settings Printing with Print Order Settings Erasing All Print Orders CARD OPERATIONS PRINT ORD. ALL ERASE 3.Select [PRINT ORD. ALL ERASE] Printing PRINT TransferringConnecting to a PCVideo Recordings to a Computer Connection Diagram Using a USB cable Using an IEEE1394 (DV) cable Transferring Memory Card Images to a Computer (Direct Transfer) Transferring Images 1.Turn the SET dial to select a setting option 2.Press the button 3.Select the image you wish to transfer with the CARD+/– button 4.Press the button Page Selecting Images for Transfer (Transfer Order) TRANSFER ORDER 3.Select [TRANSFER ORDER] followed by [ON] and press the SET dial CARD OPERATIONSTRANSFER ORDER 3.Press the MENU button and select [CARD OPERATIONS]. Select Using the NETWORK Mode (DV Messenger Version 2) Troubleshooting Tape operation-Recording Tape operation-Playback Memory Card Operation Printing Editing Condensation Condensation may form in the following cases: How to avoid condensation: When condensation is detected: Resuming use: List of Messages Direct Print Related Messages Page Handling Precautions About the battery terminal cover Cassette Protecting Tapes from Accidental Erasure Memory Card Lithium Button Battery Built-inRechargeable Lithium Battery Recycling the Built-inRechargeable Lithium Battery Cleaning the Video Heads Maintenance/Others System Diagram Optional Accessories WD-H34 Wide-converter FS-34UFilter Set SA-1Adapter Bracket VL-10LiBattery Video Light WS-20Wrist Strap Shoulder Strap SC-1000/SC-2000Soft Carrying Case SC-A50Soft Carrying Case Specifications CA-570Compact Power Adapter BP-308Battery Pack SDC-16MSD Memory Card Product Codes Index Page CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY FOR THE UNITED STATES CANADA