Canon Optura 600 Editing, Printing, Memory Card Operation

Memory Card Operation

	Problem	Solution
Memory card cannot be		Memory card was not facing the correct direction. Turn the		21
inserted.		memory card over and reinsert it.
Memory card cannot be		Insert a memory card.		21
recorded.		Memory card is full. Replace the memory card or erase		95
		images.
		Memory card is not formatted. Format the memory card.		96
		Image number reached maximum value. Set [FILE NOS.] to		69
		[RESET] and insert a new memory card.
		SD Memory Card is protected. Change the position of the		21
		protect switch.
Memory card cannot be		Set the camcorder to PLAY(VCR)•	mode.	37
played back.
		Insert a memory card.		21
Image cannot be erased.		Image is protected. Cancel the protection.		94
		SD memory card is protected. Change the position of the		21
		protect switch.
“	” flashes red.	Card error occurred. Turn off the camcorder. Remove and		96
		reinsert the memory card. Format the memory card if flashing
		persists.

Printing

Problem		Solution
The printer is not operating	1.	Set the camcorder to PLAY(VCR)•	mode.	–
even though camcorder and	2.	Disconnect and reconnect the USB cable.
printer are correctly	3.	Turn off the printer and turn it back on.
connected.

Editing

Problem			Solution
Dubbing via the camcorder’s	Set [AV	DV/	] to [OFF].	66
DV terminal does not work.
	Wrong signal format. Dubbing may work via the AV terminal.				–
	Refer also to the instruction manual of the connected device.

128