Images not recorded with this camcorder, uploaded from a computer, edited on a computer and images whose file names have been changed may not be printed correctly.

Observe the following precautions during printing:

-Do not turn off the camcorder or the printer.

-Do not change the position of the TAPE/CARD switch.

-Do not detach the cable.

-Do not open the memory card cover or remove the memory card.

If the message “BUSY.” does not disappear, disconnect the cable from camcorder and printer and reconnect the camcorder to the printer.

Cancel Printing

Press the SET dial during printing. A confirmation dialog appears. Select [OK] and press the SET dial.

-Canon PIXMA/SELPHY DS printers and CP600: Printing stops even if it is incomplete and the paper is fed through.

-Canon CP printers (except for CP600): A print in progress cannot be stopped. Printing stops when the current print is finished, and the remaining prints are canceled.

Printing Errors

If an error occurs during the printing process, an error message appears ( 131).

-Canon PIXMA/SELPHY DS printers and CP600: Resolve the error. When printing does not resume automatically, select [CONTINUE] and press the SET dial. If [CONTINUE] cannot be selected, select [STOP], press the SET dial and retry printing. Refer also to the printer manual for details.

-Canon CP printers (except for CP600): Select [STOP] or [RESUME] and press the SET dial. (The [RESUME] setting may not appear with some error messages. In that case, select [STOP].) Refer also to the printer manual for details.

-If the error still persists and printing does not restart, follow below procedure:

1.Disconnect the cable.

2.Turn the POWER switch of the camcorder to OFF and back to PLAY (VCR).

3.Reconnect the cable.

When you have finished printing:

1. Disconnect the cable from the camcorder and printer.

2. Turn off the camcorder.

110