Canon PIXMA MG6320 manual Preparing to Connect My Multifunction To My Network

Preparing to Connect My Multifunction To My Network

<< Previous Next >>

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported.

A wireless router or access point is required in order for your Multifunction to be used over a wireless LAN.

Notes on Network Connection

•The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer.

•In an office setup, consult your network administrator

•If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party.

•If an error message appears or if you have trouble with the network connection, refer to the printed manual: Network Setup Troubleshooting.

•Place the machine and computer on the same network segment.

4