Computer Settings for Connecting via Wi-Fi (Windows only)

On a computer running Windows, you must configure the following settings before you can connect the camera to the computer wirelessly.

1Confirm the computer is connected to Wi-Fi.

zzFor instructions on checking your network connection, refer to the computer user manual.

2 Configure the setting.

zzClick in the following order: [Start] menu

► [All Programs] ► [Canon Utilities] ► [CameraWindow] ► [Wi-Fi connection

setup].

zzIn the application that opens, follow the

on-screen instructions and configure the setting.

• The following Windows settings are configured when you run the utility in step 2.

-Turn on media streaming.

This will enable the camera to find the computer to access via Wi-Fi.

-Turn on network discovery.

This will enable the computer to find the camera.

-Turn on ICMP (Internet Control Message Protocol). This allows you to check the network connection status.

-Enable Universal Plug & Play (UPnP).

This will enable network devices to detect each other automatically.

•Some security software may prevent you from completing the settings as described here. Check the settings of your security software.

Adding a Computer

Add a computer to your list of devices to connect to via Wi-Fi. Follow these instructions when using a Wi-Fi Protected Setup (WPS) compatible access point to establish a push-button connection.

If your access point is not WPS-compatible, establish a connection as described in “Connecting to Access Points in the List” (=137).

• WPS makes it easy to complete settings when connecting devices over Wi-Fi. You can use either Push Button Configuration Method or PIN Method for settings on a WPS supported device.

•Refer to the user guide provided with your access point to check if it supports WPS.

•Be sure to also read the user guide included with your access point.

1Access the Wi-Fi menu. zzPress the <o> button.

2Choose a computer.

zzPress the <o><p><q><r> buttons or turn the <5> dial to choose [], and then press the <m> button.

3Choose [Add a Device].

zzPress the <o><p> buttons or turn the <5> dial to choose [Add a Device], and then press the <m> button.

XXA list of detected access points will be displayed in the [Select Network] screen.

Cover

Preliminary Notes

and Legal Information

Contents: Basic

Operations

Basic Guide

Advanced Guide

1

Camera Basics

2

Using GPS

Function

3

Auto Mode/

Hybrid Auto Mode

4

Other Shooting

Modes

5 P Mode

6

ModeTv, Av, and M

7

Playback Mode

8

Wi-Fi Functions

9

Setting Menu

10

Accessories

11

Appendix

Index

135