Lens Retraction Timing

The lens is normally retracted for safety about one minute after you press the <1> button in Shooting mode (=32). To have the lens retracted immediately after you press the <1> button, set the retraction timing to [0 sec.].

zzChoose [Lens Retract], and then choose [0 sec.].

Using Eco Mode

This function allows you to conserve battery power in Shooting mode. When the camera is not in use, the screen quickly darkens to reduce battery consumption.

1Configure the setting.

zzChoose [Eco Mode], and then choose [On].

XX[ ] is now shown on the shooting screen (=179).

XXThe screen darkens when the camera is not used for approximately two seconds; approximately ten seconds after darkening, the screen turns off. The camera turns off after approximately three minutes of inactivity.

2Shoot.

zzTo activate the screen and prepare for shooting when the screen is off but the lens is still out, press the shutter button halfway.

Power-Saving Adjustment

Adjust the timing of automatic camera and screen deactivation (Auto Power Down and Display Off, respectively) as needed (=32).

zzChoose [Power Saving], and then press the <m> button.

zzAfter choosing an item, press the <q><r> buttons to adjust it as needed.

•To conserve battery power, you should normally choose [On] for

[Auto Power Down] and [1 min.] or less for [Display Off].

• The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].

• These power-saving functions are not available when you have set Eco mode (=151) to [On].

Cover

Preliminary Notes

and Legal Information

Contents: Basic

Operations

Basic Guide

Advanced Guide

1

Camera Basics

2

Using GPS

Function

3

Auto Mode/

Hybrid Auto Mode

4

Other Shooting

Modes

5 P Mode

6

ModeTv, Av, and M

7

Playback Mode

8

Wi-Fi Functions

9

Setting Menu

10

Accessories

11

Appendix

Index

151