zzOn the camera, open the terminal cover
and insert the cable plug fully into the camera terminal.
3Turn the TV on and switch to video input.
zzSwitch the TV input to the video input you connected the cable to in step 2.
4 Turn the camera on.
zzPress the <1> button to turn the camera on.
XXImages from the camera are now displayed on the TV. (Nothing is displayed on the camera screen.)
zzWhen finished, turn off the camera and
TV before disconnecting the cable.
SX280 HS
• It is not possible to connect the included interface cable or an optional stereo AV cable at the same time as an HDMI Cable
SX270 HS
• Camera operating sounds are not played while the camera is connected to an HDTV.
Still Images | Movies |
Controlling the Camera with a TV Remote
Connecting the camera to an HDMI
In this case, you will need to adjust some TV settings. For details, refer to the TV manual.
1Configure the setting.
zzPress the <n> button, choose [Ctrl via HDMI] on the [3] tab, and then choose [Enable] (=35).
2Connect the camera to the TV. zzFollow steps 1 – 2 in “Playback on a
3 Display images.
zzTurn on the TV. On the camera, press the <1> button.
XXImages from the camera are now displayed on the TV. (Nothing is displayed on the camera screen.)
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Basic Guide
Advanced Guide
1 | Camera Basics |
2 | Using GPS |
Function | |
3 | Auto Mode/ |
Hybrid Auto Mode | |
4 | Other Shooting |
Modes | |
5 P Mode | |
6 | ModeTv, Av, and M |
7 | Playback Mode |
8 | |
9 | Setting Menu |
10 | Accessories |
11 | Appendix |
Index
•It is not possible to connect the USB cable or an optional stereo AV cable at the same time as an HDMI Cable
159