Cannot determine access point

•The WPS buttons on numerous access points were pressed simultaneously. Try reconnecting again.

No access points found

•Check to make sure that the access point is turned on.

•When connecting to an access point manually, make sure that you entered the correct SSID.

Incorrect Wi-Fi encryption key/Incorrect Wi-Fi security settings

•Check the access point security settings (=134).

IP address conflict

•Reset the IP address so that it does not conflict with another.

Disconnected/Receiving failed/Sending failed

•You may be in an environment where Wi-Fi signals are obstructed.

•Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth devices, and other devices that operate on the 2.4 GHz band.

•Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices.

•Check the connected device to make sure it is not experiencing errors.

Sending failed

Memory card error

•If the same error message is displayed even when you have inserted a formatted memory card facing the correct way, contact a Canon Customer Support Help Desk.

Receiving failed

Insufficient space on card

•There is not enough free space on the memory card to receive images. Erase images to create space on the memory card, or insert a memory card with sufficient space.

Receiving failed

Memory card locked

•The write-protect tab of the memory card in the camera to receive the images is set to the locked position. Slide the write-protect tab to the unlocked position.

Receiving failed

Naming error!

•When the highest folder number (999), and the highest image number (9999) have been reached on the receiving camera, images cannot be received.

Insufficient space on server

•Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create space.

•Save the images sent via a server (=143) on your computer.

SSL certificate not valid

Connect to a computer, use the supplied software to reset

•Check to make sure the date/time settings on the camera are correct. After confirming that the settings are correct, follow the on-screen instructions and reset the settings.

Check network settings

•Check to make sure your computer can connect to the Internet with the current network settings.

Cover

Preliminary Notes

and Legal Information

Contents: Basic

Operations

Basic Guide

Advanced Guide

1

Camera Basics

2

Using GPS

Function

3

Auto Mode/

Hybrid Auto Mode

4

Other Shooting

Modes

5 P Mode

6

ModeTv, Av, and M

7

Playback Mode

8

Wi-Fi Functions

9

Setting Menu

10

Accessories

11

Appendix

Index

178