Protecting Images

Use the protect feature to protect important images from accidental erasure.

1 Turn the mode dial to .

2 Press the MENU button to display the menu.

3 Press or button to select , and then press the SET button.

4 Press or button to select an image you wish to protect, and then press the

58SET button to protect it.

Protected images are identified by the Protected Icon.

Protected Icon

5 Press the MENU button to close this feature.

Please note that even protected images are erased when a CF card is reformatted.

To cancel protection...

Select the image you wish to unprotect, and then repeat Steps 2 and 3 as necessary.

Page 60
Image 60
Canon PowerShot A10, PowerShot A20 Protecting Images, Press the Menu button to close this feature, To cancel protection