Canon PowerShot A510, PowerShot A520 Self-timer, button, 2Select , or using the or, button and press the FUNC, *(Drive Mode) using the or button, 1Press the FUNC. button and select

Shooting – The Basics

z The lower indicator will light yellow when the shutter button is pressed halfway.

z Shooting procedures are the same as for the Mode (p. 33).

z Always use the LCD monitor to compose

images in macro mode. Shooting with the

viewfinder is possible, however, part of the image may not appear in the actual shot (p. 35).

z When the lens is zoomed out to the wide angle end*1, the recordable area is approx. 60 x 44 mm (2.4 x 1.7 in.), and at telephoto end*2, it is approx. 84 x 63 mm (3.3 x

2.5 in.).

When the zoom position is located between the telephoto end and the wide angle end, the distance between the front of the lens and the subject will be the same as the telephoto end.

z The exposure may not be optimal when the flash is used in macro mode.

*1 Closest focal distance.

*2 Maximum optical telephoto setting.

Self-timer

Mode Dial

* The cannot be set in and modes.

1Press the FUNC. button and select

*(Drive Mode) using the or button.

* The current setting is displayed.

2Select , or using the or

button and press the FUNC.

button.

z When is selected, the shutter release will be delayed for 10 seconds, and when is selected, the shutter release will be delayed for 2 seconds, after you press the shutter button all the way.

Basics The

45