Shooting – The Basics

z To shoot landscapes, swivel (pan) the camera around its own vertical axis.

z To shoot close-ups, slide the camera over the subject, keeping it parallel to the subject as you move it.

Shooting

Images can be shot in the following 2 sequences in Stitch Assist mode.

Left Right Left to right horizontally

Left Right Right to left horizontally

1Turn the Shooting mode dial to

.

z The LCD monitor will turn on.

2Select theshootingsequence using the or button and pressthe SET button.

zThe shooting sequence is set.

z You can also press the shutter button directly to shoot without pressing the SET button.

3Shoot the first image.

z The exposure and white balance settings are set and locked with the first image.

4Compose and shoot the second image so that itoverlaps the first.

z Minor discrepancies in

the overlapping portions Sequence can be corrected when

the images are stitched together.

z Use the or button to check or retake the recorded images.

5Use the same procedures to shootthe remaining images.

z A maximum of 26 images can be recorded.

6Press the SET button after the last shot.

50