3Press the T arrow on the omni selector, then select the number of shots using the W or X arrow on the omni selector.

z If you press the W or X arrow on the omni selector continuously, the number of shots increases in units of 5 shots at a time.

z The maximum number of shots* is determined according to the CF card’s remaining capacity.

*In some cases, the actual maximum number of shots may be fewer than the displayed number.

4

Press the SET button

 

z

appears on the LCD monitor and

appears on the display

panel.

5Press the shutter button.

z The first image is shot and the interval shooting session starts. z Once the set number of shots is taken, the camera automatically powers down regardless of the power saving function settings.

z If the below operations are accessed while the interval shooting is in process, the interval shooting session will be canceled.

Turning the mode dial or pressing the shutter button halfway while the camera is waiting to shoot the next image

Opening the CF card slot cover or battery cover

Switching to Playback mode

Turning off the power

z Once the interval shooting session is started, all operation buttons become inactive.

z The lens stays extended until the next image is shot.

z Images are not displayed on the LCD monitor right after being shot.

z Interval shooting is not available when the date and time are not set.

z Continuous Shooting, AEB mode and Focus-BKT mode are not available. The self-timer can only be used for the first shot in the series.

Effects Particular Selecting – Shooting

113