Canon PowerShot G6 mark, the z mark on the adapter and, Attach the hood by aligning the z, mark on the rear of the hood with, rotating the hood until the hood’s

3	Attach the hood by aligning the z
	mark on the rear of the hood with
	the z mark on the adapter and
	rotating the hood until the hood’s
	z mark aligns with the adapter’s
	mark.
	z To remove the lens hood and adapter,
	hold down the ring release button and
	turn the adapter in the opposite direction
	shown.

z If you use the built-in flash when the lens hood is attached, a portion of the flash will be blocked by the lens hood and appears dark.

z If you use the viewfinder when the lens hood is attached, a portion of the view will be blocked by the lens hood.

z When you are not using the lens hood, it can be stowed as shown in the illustration below.

Appendix

179