Index Playback

z Press the button to switch to index playback (3 images).

z Select an image using the main dial or the W or X arrow on the omni selector and mark or remove marks from images using the S or T arrow on the omni selector.

z The selection number and a check mark appears at the bottom of selected images.

z After you press the SET button, you can select all the images by selecting [Mark all] using S or T on the omni selector and pressing the SET button again. (You can deselect all the images by selecting [Clear all].)

z You can select images using the main dial or the W or X arrow on the omni selector and change the settings using the S or T arrow on the omni selector after [Mark all] or [Clear all] has been selected.

5Press the MENU button.

z The image selection screen will close.

Adjusting the Play Time and Repeat Settings

You can change the play time for all the images in a show and have the show repeat itself continuously.

Sets the duration that each image in a slide show is displayed. Play Time The options are any one of 3 – 10 seconds, 15 seconds, 30

Erasing Playback,

Repeat

seconds and Manual.

Sets whether the slide show stops when all the slides have been displayed or continues to display until stopped.

1Display the slide show menu.

137