Super Macro Mode

Mode Dial

Compared with normal Macro mode, you can get closer to the subject and magnify it more, when shooting. The background can also be shot with different effects.

You can shoot subjects in Super Macro mode when the distance from the end of the lens to the subject is in the following range: 5 to 20 cm (2.0 to 7.9 in.) (wide angle end – 86 mm (35mm film equivalent)).

The resolution can only be set to M2, M3 or S. If the resolution is set to L, M1 or RAW when you set the camera to Super Macro mode, the resolution will automatically be changed to M2. (The resolution will return to the previous setting when you cancel Super Macro mode.)

1Presson. the DISPLAY button to turn the LCD monitor

2 Hold down the button until appears on the LCD monitor.

z The zoom position moves within the recordable area.

z You can cancel the super macro mode by pressing the button again.

z Be careful not to bang the lens against the subject when shooting in Super Macro mode.

z Super Macro mode does not work properly when any separately sold lens is attached to the camera.

z The digital zoom cannot be used.

z Recordable areas at the minimum shooting range are as follows:

Zoom Position

(35mm film equivalent) Recordable Area

Wide angle end

Approximately 48 x 36 mm (1.9 x 1.4 in.)

 

 

86 mm

Approximately 24 x 18 mm (0.9 x 0.7 in.)

z Super Macro mode can also be selected and saved in Custom Modes C1 and C2.

Settings Select Camera the Letting – Shooting

75