102Printing

Connecting a Printer

You can make clear prints swiftly and easily when you connect the camera to a direct print function compatible printer (CP series, sold separately) or a direct print function compatible Bubble Jet printer (sold separately). You can also print using DPOF print settings.

You are recommended to use the optional AC Adapter Kit ACK500 (sold separately) rather than the battery pack to power the camera when it is connected to a printer. If you do use a battery pack, ensure that it is fully charged and monitor the battery charge while printing.

• Please see the System Map supplied with your camera for information on direct print function compatible printers (CP series).

•Please see your printer’s user guide for information about installing paper and ink cassettes / tanks.

Connecting to a Direct Print Function Compatible Printer (CP Series)

Your printer should come equipped with two direct interface cables. To connect to this camera, please use the cable (DIF-100) that has the symbol on its connector.

Shut the camera’s power off (p. 26).

To a Power Outlet

•Attach the power cable to the printer and insert its plug into a power outlet.

•You can also power the printer with a rechargeable battery if it is so equipped. Please see your printer’s user guide.