Downloading Images to a Computer 123
Connect the supplied USB interface cable to the computer’s USB port and the camera’s DIGITAL terminal.
USB Port | DIGITAL OUT |
Terminal |
USB Cable
USB Cable
1Slip a fingernail under the upper edge of the terminal cover to open it.
2Insert the connector until it clicks.
• You do not need to turn off the computer or camera when making a USB connection.
•Please refer to your computer’s manual for information regarding the location of the USB port.
Set the camera’s mode swith to the 
position and turn the camera’s power on.
The LCD monitor will turn on in replay mode and then blank out when the connection to the computer is complete.
Please refer to the Software Starter Guide for the subsequent procedures.