
104Printing
To the BJ Printer | • Turn the Bubble Jet printer’s power on | ||
after you have connected the power | |||
| |||
| cord to the Bubble Jet printer and | ||
| inserted the other end in a power | ||
| outlet. |
| |
| • Attach the interface cable to the Bubble | ||
| Jet printer. |
| |
| • Open the camera’s terminal cover and | ||
Interface Cable | insert the cable’s connector into the | ||
camera’s DIGITAL terminal. Orient the | |||
| |||
| cable so that the word Canon on the | ||
| connector faces the camera’s front | ||
| panel. |
| |
| • Set the mode switch to the | position | |
| and turn on the camera’s power. |
• will display when the printer is correctly connected.
This shows when a BJ printer is connected.
• On Bubble Jet printers with operation panels, images cannot be printed through the operation panel while the camera is connected.
•The following cannot be conducted while the printer is connected.
-Playing movies
- Setting the language with the | and the | button |
combination. |
|
|
•When the printer is disconnected, theor
symbol will disappear from the LCD monitor and the camera will revert to the standard replay mode.
•Use the following procedures to datach the cable from the camera and printer.
1.Detach the cable from the printer.
2.Shut off the camera’s power.
3.Detach the cable from the camera.
•Ensure that you grip the connector’s sides when you detach the cable from the camera’s DIGITAL terminal.