121

Shooting/Replaying with a TV

You can use a video-compatible television as a monitor to shoot or replay images when it is connected to the camera with the supplied AV Cable AVC-DC100. You must shut the TV and camera power off before you attach or detach the AV cable.

Yellow

Black

•After you have attached the AV cable at both ends, turn on the TV and set its TV/Video switch to Video.

• Set the mode switch to

or

and turn the camera power on.

You can shoot or replay images using the normal procedures.

•If the images are not appearing on the TV when shooting, press the button.

• A TV set cannot be used in mode.

•No image will appear on the LCD monitor when the camera is connected to a TV.

•If the TV is a stereo model, you can plug the audio plug into either the left or right Audio In jack. Please refer to the TV’s manual for details.

The video output signal can be switched (NTSC or PAL) to accommodate different regional standards. The default setting varies between regions.

NTSC: Japan, U.S.A., Canada, Taiwan, etc.

PAL: Europe, Asia (excluding Taiwan), Oceania, etc.

If the video system is set incorrectly, the camera output may not display properly.