Print Settings (DPOF Print Settings) (continued)
Select images for printing. |
| Number of Copies |
3 Single Images |
|
|
|
|
•When the print type (p. 137) is set to [Standard] or [Both], select an image using B or A on the multicontroller. You can set the number of copies (up to 99) to be printed using C or D on the multicontroller.
•When the print type (p. 137) is set to [Index], select an image using B or A on the multicontroller and mark or remove marks from images using C or D on the multicontroller.
•You can use the same procedures to select images in index replay (3 images). Press the 
button to switch between single replay and index replay.
All the Images on a CF Card
•Press the 
button to switch to index replay (three images).
•You can set one copy of each image to print by pressing 
, then selecting [Mark All] using C or D on the multicontroller, and pressing 
again.
•When the print type is set to [Standard] or [Both], the setting for the number of print copies can be changed for each image. When [Index] is selected, the print settings can be deleted. For the instructions on changing settings, please reread Step 3 from the beginning.
•You can cancel all the settings by selecting [Clear all].
4 Press the 
button.
• The selection mode will turn off and the Print Order menu will reappear.
• Images are printed in order from oldest to newest by the shooting date.
• A maximum of 998 images can be marked per CF card.
•When [Print Type] is set to [Both], the number of copies can be set. When it is set to [Index], the number of copies cannot be set (only one copy will be printed).
•Print settings can also be assigned to images with the supplied software programs on a computer.
136