Installing the Battery Pack

Install Battery Pack NB-2L (supplied) into the camera as follows. We recommend that you use the AC Adapter Kit ACK700 to power the camera for extended periods (p. 162).

1

Turn off the camera (p. 24).

• Check that the power/mode indicator is not lit.

2

2

Slide the CF card slot/battery cover in

the direction of the arrow to open the

 

 

 

cover.

 

1

 

3

 

Hold back the battery lock in the

 

direction of the arrow with the corner

 

 

of the battery pack, then insert the

 

 

battery pack into the compartment

 

 

until it is locked.

 

 

• To remove the battery pack, release the battery

 

Battery lock

lock.

 

 

4

 

Close the CF card slot/battery cover

 

then slide it to the original position

 

 

until it clicks.

Preparing the Camera, Basic Functions

•Charge the battery pack before using it the first time (p. 15).

•When the upper indicator on the left side of the viewfinder is blinking green, the CF card is being written to, read, erased or transmitted to. Therefore, never turn off the camera or open the CF card slot/battery cover while this indicator is blinking green.

•Remove the battery pack when the camera is not in use.

17