3 Select images for transferring. Single Images
•Select an image using B or A on the multicontroller and mark or remove marks from images using C or D on the multicontroller.
•You can use the same procedures to select images in index replay (3 images). Press the 
button to switch between single replay and index replay.
All the Images on a CF Card
•Press the 
button to switch to index replay (three images).
•Then press 
, and select [Mark All] using C or D on the multicontroller and press 
again. (If you select [Clear All] instead of [Mark All], you can remove marks from all the images.)
•You can mark or remove a mark from each image after marking or removing marks from all the images.
4 Press the 
button.
• The selection mode will turn off and the Transfer Order menu will reappear.
• Images are transferred in order from oldest to newest by the shooting date.
• A maximum of 998 images can be marked per CF card.
•Transfer settings can also be assigned to images with the supplied software programs on a computer.
Printing, Transferring
143