IMPORTANT
You must install the software and USB driver bundled on the Canon Digital Camera Solution Disk before connecting the camera to the computer. Please refer to the Software Starter Guide for installation instructions, image download instructions and system requirements.
1 Connect the supplied USB interface cable to the computer’s
USB port and the camera’s 
terminal.
•You do not need to turn off the computer or camera when making this connection.
•Please refer to your computer manual for information regarding the location of the USB port.
•The LCD monitor will blank out when the connection to the computer is complete and the power/mode indicator will light yellow.
USB port
Terminal
1. Open the terminal cover with your fingernail.
2. Insert the connector until it clicks.
USB cable
2. USB cable
1. Terminal cover
To disconnect the cable from the camera: Hold the cable connector firmly at both sides and pull it straight out.
146