Setting the White Balance
When the white balance mode is set to match the light source, the camera reproduces colors more accurately.
Auto Settings are automatically set by the camera
Daylight For recording outdoors on a bright day
Cloudy For recording under overcast, shady or twilight skies
Tungsten For recording under tungsten and
Fluorescent For recording under
Fluorescent H For recording under daylight fluorescent, or daylight
Flash For flash photography
Custom1 For setting a custom value with a white sheet of paper, etc., to obtain the optimal white balance
Custom2 for the conditions. There are two custom values: custom1 and custom2.
1 Press the 
/ 
/ 
button.
2 Select 
* (Auto) using C or D on the multicontroller.
* The current setting is displayed.
3 Select the desired setting using B or A on the multicontroller.
•Please see the next page regarding the 
custom setting.
•You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image in shot.
4 Press 
or the 
/ 
/ 
button.
5 Shoot the image.
•The white balance cannot be adjusted when the photo effect is set to 
(Sepia) or 
(B/W).
80