Checking the Focus

• If you press the qrbuttons or turn the Êdial during playback, the image will switch. If you keep the qr buttons pressed, you can fast-forward through images.

•The power saving function (p. 51) does not work during slideshows.

•You cannot change [Play Time] if [Bubble] is chosen in [Effect].

•In single image playback, you can also start a slideshow by pressing and

holding the m button and immediately pressing the button.

Checking the Focus

You can magnify the area of a recorded image that was inside the AF Frame, or the area of a face that was detected, to check the focus.

Press the lbutton to switch to the focus check display (p. 44).

XA white frame will appear where the AF frame or face was when the focus was set.

XA gray frame will appear on a face detected during playback.

XThe area within the orange frame appears magnified.

Switch frames.

●Move the zoom lever toward konce. XThe screen shown to the left will appear.

●Press the mbutton to move to a different frame when multiple frames appear.

Change the magnification level or location.

●Use the zoom lever to change the display size, and the opqrbuttons to change the display position while checking the focus.

●Pressing the n button resets the display to Step 1.

126