You can cut out a portion of a recorded image and save it as a new image file.
Choose [Trimming].● Press the nbutton to choose [Trimming] in the 1tab, then press the m button.
| Choose an image. |
Trimming Area | ● Press the qr buttons or turn the Êdial to |
choose an image, then press the mbutton. |
Trimming Area Display
Recorded pixels after trimming
XA frame will appear around the portion of the image to be trimmed.
XThe original image will display in the upper left and the trimmed image will display in the lower right.
●If you move the zoom lever to the left or right, you can change the frame size.
●If you press the opqr buttons, you can move the frame.
●If you press the l button, you can change the frame orientation.
●In an image with detected faces, gray frames appear around the faces located in the upper left image. The frames can be
used for trimming. You can switch between frames by turning the Ê dial.
●Press the m button.
Save as a new image and display.●Follow Steps 4 and 5 on p. 142.
•Images recorded at a pixel setting of 
(p. 77), or images resized to
(p. 142) cannot be edited.
•RAW images cannot be edited.
•Images that can be trimmed will have the same wide and height ratio after trimming.
•The number of recorded pixels in a trimmed image will be smaller than before trimming.
143