Changing Shooting Function Settings

If you set the mode dial to G, you can change the settings in the 4 tab (p. 47).

Before attempting to shoot using a function explained in this chapter in modes other than G mode, check if the function is available in those modes (pp. 182 185).

Turning Off the AF Assist Beam

The lamp will automatically light to assist focusing in low light conditions when you press the shutter button halfway. You can turn off the lamp.

Choose [AF-assist Beam], then press the qrbuttons to choose [Off].

Changing the Flash Timing

You can change the timing of the flash and shutter.

Choose [Flash Settings], then press the m button.

Press the opbuttons or turn the Ê dial to choose [Shutter Sync.], then press the qrbuttons to choose a setting.

1st- The flash fires right after the shutter curtain opens.

2nd- The flash fires right before the shutter curtain closes.

162