Canon VC-C50i Factory Default Settings

40

Factory Default Settings

When the Product is shipped from the factory or when RESTORE DEFAULT has been set to

[YES] (→ P.34), the settings are set to the default values shown below.

(Camera Default Settings)

Item Default Item Default

Focus *Auto Preset None

Brightness *Normal Clock and Text Not displayed

(Setting Screen Default Settings)

Item Setting

BAUD RATE 9600

STOP BIT 1

SET MENU DATA 8 BIT Read only

NON PARITY Read only

REMOTE CONTROLLER ID 0

COMMAND VC-C4 MODE

DATE DISPLAY OFF

TIME DISPLAY OFF

TXT DISPLAY OFF

DISPLAY MENU SET DATE *01.JAN.’00

SET TIME *00:00:00AM

TIME STYLE *AM/PM

DATE STYLE *DD/MM/YY

Specified text *None

PAN SPEED AUTO (10 for MANUAL)

TILT SPEED AUTO (10 for MANUAL)

MOVABLE RANGE DEFAULT

CAMERA MENU DIRECTION MIRROR OFF

NIGHT MODE OFF

AE REFERENCE DEFAULT (5 for MANUAL)

FLICKERLESS AE OFF

*Settings marked with an asterisk revert to the factory default values when the power is

switched off and then on again (→ P.18). The values for all other settings are saved when

the power is turned off.

Contents

Main Introduction Features of the VC-C50i/VC-C50iR Communication Camera Page a Safe Use of Equipment a a CAUTION: a Important Warnings Page Page a IMPORTANT SAFETY INSTRUCTIONS Page Page Cleaning the Lens Maintenance Cleaning the Equipment Icons Used in This Instruction Manual a CONTENTS Before You Use the Product Checking the Camera and Its Accessories Nomenclature VC-C50i camera VC-C50iR camera AC adapter PA-V16 (NTSC model only) AC cable (NTSC model only) Installing the Product Using a Tripod Using the Wide-angle Converter Connecting the Components Attaching the Multiconnector to the Camera Connecting to the Multiconnector Multiconnector Pin Layout B10 A1 Pin No. Item External Device I/O Terminals Turning the Power ON and OFF LED Displays and the Camera Status LED Display Camera Status Controlling the Camera from the Wireless Controller > < ^ Loading the Batteries into the Wireless Controller Range of Camera Head Movement VC-C50i VC-C50iR To move the camera head left and right (pan) Press the 4 and 6 buttons. Changing the Camera Head Angle To zoom in (TELE): Press the t side of the button. To zoom out (WIDE): Press the w side of the button. Zooming In/Out To use autofocus mode Press the a button. The camera focuses automatically. Focusing To fix the focus Press the n button. To focus on nearby subjects Press the r button. Adjusting the Brightness To brighten or darken the image Press the z side of the button to brighten the image and the x side to darken the image. To store a position 1. Storing a Preset Camera Position To switch the camera off In the status of camera ON, press the p button. To switch the camera on In the status of camera OFF, press the p button. Switching the Camera ON and OFF Camera Settings Buttons Used to Specify the Settings buttons 58 Setting Menu Description Setting the Clock // are selected. YY/MM/DD 24H Selecting Display/Hide Clock and Text Example of clock and text display Entering Characters move the cursor to [OK]. 11 lines Setting the Camera Head Movement Speed and Pan Operation NH G O EI Setting the Range of Camera Head Movement When the setting is changed Setting the AE / / [5] corresponds to the Normal brightness setting ( P.24) MAIN MENU SET MENU CAMERA MENU AE SETTING NOTE Night Mode Settings VC-C4 Mode Setting Menu RS-232C Settings ID Mode Setting the ID Number T W ID Mode 1. Press the i button. Selecting the Camera to be Controlled ID Mode 1. Press the i button. 2. Press the 0 button. Cancelling ID Mode Troubleshooting The wireless controller does not work. There is no picture on the monitor. Cannot adjust the camera head angle properly. The camera will not move to a preset position. The camera will not focus. Factory Default Settings Specifications * shaky when the camera head is being moved slowly. Item Details Specifications The CE Mark is a Directive conformity mark of the European Community (EC).