3. Camcorder: Touch [End] > [OK] when finished.
This concludes the procedure for using
IMPORTANT
∙Observe the following precautions when transferring files. Failing to do so may interrupt the transfer and incomplete files may remain at the transfer destination.
-Do not open the double memory card slot cover.
-Do not disconnect the power source or turn off the camcorder.
∙If the file transfer is interrupted, select [New files] and perform the file transfer again.
∙If incomplete files remain at the transfer destination, check the content and make sure they are safe to delete before deleting them.
NOTE
∙Depending on the access points settings and capability, playback may take time to start or may not appear smooth.
∙After the connection is established, you can touch [View Information] to view the access points SSID, connection protocol, and the camcorders IP address and MAC address. You can also select the access point to which the camcorder will connect.
∙The following types of MP4 scenes will be recognized as multiple files on other devices.
-Scenes exceeding 4 GB
-Scenes recorded at 35 Mbps exceeding 30 minutes
-Scenes recorded with a recording mode other than 35 Mbps exceeding 1 hour