Canon Xi controller, controller, Playing Back the Added Sound, balance with the ST-1/ST-2buttons on the wireless, 2.If you have selected [MIX/VARI.], adjust the mix

7.Press the STOP 3 button on the wireless controller to stop dubbing.

Audio device: Stop playback.

PAUSE REW PLAY FF

ZERO SET

MEMORY / STOP /

AUDIO DUB. PAUSE SLOW ⋅2

AV INSERT AVDV MENU SET

E

Set the zero set memory at the end of the scene you wish to dub audio. The camcorder will automatically stop audio dubbing at that point.

Playing Back the Added Sound

You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust the balance of both sounds.

CAMERA PLAY (VCR) CARD CAMERA CARD CAMERA

1. Press the 12bit AUDIO OUT button on the wireless	SEARCH SELECT		SELF T.
controller.
	12bit	MIX BALANCE	TV SCREEN
• The setting changes with each press of the button.	AUDIO OUT	ST-1 ST-2
	PLAY MODE D.EFFECTS ON/OFF		DATA CODE
	CARD
• STEREO1: Plays back the original sound.	CARD	SLIDE SHOW

•STEREO2: Plays back the added sound.

•MIX/FIXED: Plays back stereo 1 and stereo 2 in the same level.

•MIX/VARI.: Plays back stereo 1 and stereo 2. The mix balance can be adjusted.

2.If you have selected [MIX/VARI.], adjust the mix

balance with the ST-1/ST-2 buttons on the wireless	SEARCH SELECT		SELF T.
	12bit	MIX BALANCE	TV SCREEN
	AUDIO OUT	ST-1 ST-2
controller.
	PLAY MODE D.EFFECTS ON/OFF DATA CODE
	CARD
• A bar showing the balance appears for 4 seconds.	CARD	SLIDE SHOW

•Press the ST-1 button to increase the volume of Stereo 1 and the ST-2 button to increase the volume of Stereo 2.

The camcorder resets to [STEREO1] when you turn the camcorder off. However, the mix balance is memorized by the camcorder.

Editing

107