Changing the Remote Sensor Mode

Two remote sensor modes and an off setting are available to prevent interference

from other Canon wireless controllers being used nearby.

Turning the Remote Sensor Off

E

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY (VCR)

SYSTEM

 

WL.REMOTE•••• 1

 

(

43)

Open the menu and select [SYSTEM]. Select [WL.REMOTE], set it to [OFF B] and close the menu.

“B“ appears.

Changing the Remote Sensor Mode

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY (VCR)

SYSTEM

 

WL.REMOTE•••• 1

 

(

43)

Using of

1.On the camcorder, open the menu and select [SYSTEM]. Select [WL. REMOTE], set it to [A 2] and close the menu.

The selected mode appears for 4 seconds.

2.On the wireless controller, press and hold the REMOTE SET button. Press the ZOOM T button for mode 2. Keep the button pressed for over 2 seconds.

If you have set the camcorder to mode 1, press the ZOOM W button for mode 1.

AUDIO DUB. PAUSE SLOW ⋅2

AV INSERT AVDV MENU SET

REMOTE SET

ZOOM START

PHOTO W T /STOP

SEARCH SELECT

 

 

SELF T.

12bit

MIX BALANCE

TV SCREEN

AUDIO OUT

ST-1

ST-2

 

Range Full the Features

❍The wireless controller returns to mode 1 when you replace the batteries. Change the mode if necessary.

❍Make sure that camcorder and wireless controller are set to the same mode. Display the camcorder’s mode by pressing any button on the wireless controller (except of the REMOTE SET button) and set the wireless controller’s mode to the same mode. Change the batteries if the wireless controller still does not work.

51