Playing Back with the Built-in Speaker/Headphones

Selector dial

E

Built-in speaker

H (phones) terminal

The built-in speaker does not sound when you use headphones.

The built-in speaker is monaural. Use headphones for stereo sound.

Adjusting the Volume

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY (VCR)

Turn the selector dial up to increase the volume, and down to lower the volume.

• A volume bar appears for 4 seconds.

• You can turn off the volume completely by turning the selector

dial down until [OFF] appears. Turn the selector dial up to increase the volume again.

Sound may become distorted when the volume is turned up too high.

The camcorder retains the setting even if you turn it off (separately for headphones and built-in speaker).

See also Using Headphones during Recording ( 77).

Mastering Basics the

39