Recording Still Images to a Memory Card

2

CARD

TAPE

1

POWER

 

CAMERA

OFF

PLAY(VCR)

E

3

PHOTO 4

PHOTO

The camcorder is equipped with a mechanical shutter so that you can record vivid still images onto a memory card (Progressive Photo function). You can also record onto a memory card images from a tape in the camcorder, or images input through the DV in terminal.

•Moving pictures cannot be recorded onto a memory card.

•Images input through the AV in terminal cannot be recorded onto a memory card.

• Memory cards cannot record audio.

SD Memory Card

• If you are using an SD Memory Card, make

Front

Back

sure the protect switch is set to allow

 

 

recording.

 

Protect

 

 

switch

Make sure a memory card that has enough

memory available is inserted into the camcorder.

While the card access indicator flashes, do not disconnect the power source. Doing so could result in data damage.

1.Press the small green button on the POWER switch and hold, turn the POWER switch to CAMERA.

2.Move the TAPE/CARD switch to CARD.

•The number of images that can still be recorded on the memory card, and other information appear in the display.

•The camcorder will turn itself off if you are using a battery and do not operate the camcorder for more than about 5 minutes. Set the POWER switch to OFF and then back to CAMERA.

3.Press the PHOTO button halfway and hold it.

•Exposure is locked.

•During autofocus F flashes white in the display as the camcorder adjust the focus and it is displayed continuously as a green mark when the camcorder is ready to take the still image.

Card Memory a Using

107