Appears immediately after you start recording, and the video heads are badly contaminated. Make sure to clean the video heads when this caution appears.
( 139)
HEADS DIRTY,
USE CLEANING CASSETTE
Appears if you have tried to mark 51 or more images for printing, or if a mark file cannot be edited.
( 113)
A memory card has not been inserted into the camcorder.
PRINT MARK ERROR
NO CARD
E
Memory card caution phrases
An error has occurred with the memory card.
The camcorder cannot CARD ERROR record or play back. A
temporary card error is also possible. If
CARD ERROR disappears after 4 seconds
and flashes red, turn the camcorder’s power off and back on again, and remove
and reinsert the card. If flashes green, recording or playing back is possible.
There is no more remaining memory
on the memory card.CARD FULL Change the card or
erase images.
You have reached the maximum file or folder number.
( 104)
There are no images recorded on the memory card.
You are using an SD Memory Card and it is set for erasure pre- vention. Change the position of the protect switch.
Appears when you press the start/stop button in CARD CAMERA mode. The image isn’t recorded on the cassette or memory card.
NO IMAGES
THE CARD IS SET FOR ERASURE PREVENTION
IN CARD POSITION
( 106)
NAMING ERROR
The image has been
recorded in an
incompatible JPEG UNIDENTIFIABLE
format or other format that the camcorder cannot play back, or the image data has been damaged.
IMAGE
155