Audio Dubbing

You can add sound to the original sound on a pre-recorded tape from audio

products (AUDIO IN) or with the internal or external microphone (MIC. IN). The E original sound will not be erased. For best results, add sound to tapes that have

been recorded with this camcorder in SP mode with 12-bit sound. If there are non-recorded portions on the tape, or portions recorded in a mode other than SP mode, or with 16-bit or 12-bit, 4-channel sound, dubbing will stop. If your tape hasn’t been recorded in SP mode with 12-bit sound, we recommend dubbing your original tape onto a blank tape using the ZR50 MC/ZR45 MC’s analog line-in function, then dubbing audio onto the new tape. Make absolutely sure to set the audio mode of the new tape to 12-bit and the recording mode to SP.

To connect other audio equipment:

: Signal flow

STV-250N

AV

Stereo Video Cable

 

OUTPUT

AUDIO

An audio device

L

R

(i. e. CD player)

 

MIC

Make sure the AV/headphone terminal is set to AV through the menu ( 34). If PHONES appears in the display, switch the terminal.

Notes:

•Do not use the yellow video terminal.

•The AV terminal doesn’t put out any video, so connect the S-video terminals and check your TV, or check the LCD or the viewfinder as you add new sound. Always check the new sound with the speaker.

To connect an external microphone:

Editing

97