Introduction
DICOM Theater installation overview
To install the DICOM Theater system completely, you have to follow these steps:
1.Install the BarcoMed display controller(s) in the PC. For more information, please refer to the section about the “Display controller installation”.
2.Install and connect the medical grade projector(s) and display(s). For more information, please refer to the MGP 15 Owner’s Manual and the display User Manual.
3.Install the BarcoMed driver software. For more information, please refer to the section about the “BarcoMed software driver installation”.
4.Install the MediCal Pro and DICOM Theater software. For more information, please refer to the section about the “MediCal and Dicom Theater software installation and usage”.
5.Start and use MediCal Pro. For more information, please refer to the section about the “MediCal and Dicom Theater software installation and usage” and to the MediCal Pro User Manual.
6.Install the optical sensor(s).
How to control the medical grade projector
The projector can be controlled:
•Partly, by using the Dicom Theater software. For more information, please refer to the section about the “MediCal and Dicom Theater software installation and usage”.
•Completely, by using the projector’s
14
